Home⁄ Facilities⁄ Instruments⁄ User Instruments⁄ Spectroscopy and Electronic Measurements⁄ ICP-MS Inductively Coupled Plasma Mass Spectrometry
User Instruments
- Electron and Optical Microscopy
- Vitrification
- Zeiss Gemini 500 Scanning Electron Microscope
- Thermo Fisher Talos Arctica TEM/STEM
- Thermo Fisher Helios G4 UX Focused Ion Beam
- Thermo Fisher Spectra 300 STEM 30-300kV (Andromeda)
- Thermo Fisher Titan 300 S/TEM 60-300kV (Perseus)
- Zeiss Sigma 500 Scanning Electron Microscope
- FEI/Thermo Fisher Titan Themis CryoS/TEM 60-300kV
- Kraken STEM
- Olympus BX51 with crossed polarization
- Olympus BX51 W1F
- Olympus BH-2 with darkfield
- Fischione 1010 Ion mill
- Sputter Coaters
- Leica Ultracut UCT Ultra-microtome
- Leica EM UC7/FC7 Cryo-Ultra-microtome
- Allied Multiprep polishers (A&B)
- Zeiss LEO 1550 FESEM (Keck SEM)
- Tescan Mira3 FESEM
- FEI Strata 400 STEM FIB
- FEI Tecnai 12 BioTwin TEM
- FEI F20 TEM STEM
- General Test and Measurement Equipment
- Mechanical Properties Testing and Analysis
- Sample Preparation, Cutting, Polishing, Shaping, Joining, and Machining
- Allied-High-Tech-High-Speed-Saw
- Allied-High-Tech-Low-Speed-Saw
- Vitrification
- West Bond 747630E Wire Bonder
- TPT-HB05-Wire-Bonder
- Struers Rotopol
- Portable Spot Welder (Hughes HRW250B)
- Spex 8000 MIXER /MILL
- Fritsch Planetary Micro Mill
- SS White Sand Blasting Unit
- MicroMech Wafering Saw
- Glass Bead Abrasive unit (sand blasting)
- Garlock GEM-T Jet mill
- Buehler Simplemet II mounting press
- Branson Ultrasonic Bath (small)
- Branson Ultrasonic Bath (large)
- Ball Mill
- Soft Matter/Polymer Analysis
- ThermoFisher Capillary Breakup Extensional Rheometer (CaBER)
- Bruker AutoFlex Max MALDI-TOF Mass Spectrometer
- TA Instruments DHR3 Rheometer
- JAI-LC9110NEXT-Recycling-Preparative-GPC
- TA Instruments DSC Auto 2500 Differential Scanning Calorimeter (DSC)
- TA Instruments 5500 Thermogravimetric Analyzer (TGA)
- Waters Ambient Temperature GPC: DMF
- Waters Ambient Temperature GPC: THF
- Agilent Ambient Temperature GPC: Aqueous
- Spectroscopy and Electronic Measurements
- ICP-MS Inductively Coupled Plasma Mass Spectrometry
- Cary 5000 UV-Vis-NIR Spectrophotometer
- Edinburgh FLS1000 Spectrometer and Lifetime Measurement
- WITec Alpha300R Confocal Raman Microscope
- Quantum Design DynaCool PPMS
- 3i Marianas Spinning Disk Confocal Microscope
- JASCO-1500 CD Spectrometer
- Quantum Design MPMS3 SQUID Magnetometer
- Lakeshore Cryogenic Probe Station
- Cascade CP06 Four Point Probe Setup
- Quantum Design Physical Property Measurement System
- Quantum Design 14T “Blue” PPMS
- Novocontrol Thermal Stimulated Depolarization Current (TSDC)
- Bruker Vertex V80V Vacuum FTIR system
- Bruker Hyperion FT-IR Spectrometer & Microscope
- Renishaw InVia Confocal Raman microscope
- Surface Analysis and Characterization
- Test Equipment Lending Library
- Thin Film Deposition and Material Processing
- Labconco Inert Glovebox with HQ Graphene 2D Material Transfer Station
- Carbolite 1600°C Vacuum Tube Furnace
- KSV-NIMA-KN4010-Dip-Coater
- KSV-NIMA-KN2002-Langmuir-Blodgett-Trough
- Inert Gas Glove Box
- Carver 25 ton press
- Enerpac 10 ton press
- Hotpack Vacuum Oven
- National Vacuum Oven
- Lindberg High Vacuum Furnace
- Controlled Atmosphere Furnaces
- Air Furnaces
- Laurell-WS-400A-Spin-Coater
- Varian Thermal Bell Jar Evaporator
- KJL Magnetron Sputtering Tool
- Sputtering Deposition System
- X-ray and Diffraction Analysis
ICP-MS Inductively Coupled Plasma Mass Spectrometry
ICP-MS systems for solid and liquid samples, owned and operated by the CMaS Facility at Cornell.
See instrument, contact and rate information at https://cmas.eas.cornell.edu/